Series CCW725 & Series CCW7251T Offset Glaze
Features
The Series CCW725 Curtain Wall is designed for simple screw spline fabrication and panel-set installation, available in both captured glazed or blind glazed options. The screw spine joinery effectively eliminates exposed fasteners for a refined and professional appearance, and panelized assembly allows for shop assembly to ensure better quality control. With the Series CCW725, customers get a proven and reliable commercial curtail wall solution that meets every requirement of the application.
- Width: 2-1/2”
- Depth: 7”
- Infill: 1/4″ or 1”
Series CWW451 & Series CWW451T Offset Glaze
Other Features
- Same EPM gasket used on exterior/interior and perimeter
- Panelized assembly for “ladder” type installation
- Factory pre-punched alignment holes 9” on center
- P-bar attached to back members with #12-14 x 1 ¼” HWH self-drilling screws
- Removable snap-on interior trim cover at head, horizontal and sill
- Injection molded ABS plastic end dams at head, horizontal and sill
Series CWW451 & Series CWW451T Offset Glaze
Performance
- Air Infiltration test at 6.24 PSF (ASTM E283): < .06 CFM / FT2
- Uniform load deflection test (ASTM E330): +/- 60 PSF
- Water infiltration test (ASTM E331): 20 PSF
- Uniform load structural test (ASTM E330): +/- 90 PSF
Series CWW451 & Series CWW451T Offset Glaze
Powder Coat Options
Bone White – YA-200u
Charcoal – DAS2-80002C50
Hartford Green – DGS3-60006
Almond – DHS2-280002
Medium Bronze – DDS3-60006
Forest Green – DGS3-60016
Vermillion Red – DRS3-60016
Sandstone – DHS2-80004
Architectural Bronze – DDS2-8002
Royal Blue – DLS3-60010
Redwood – 038/30041
Clay – DHS2-8003
Jet Black – 038/80020
Boysenberry – 038/30033
Champagne – 038/15021
