Cardinal > Enclosures > Frameless Swing Door TruFit Series

Features

TruFit Series

Features

The TruFit Series adds a distinguished, customized look and an open and inviting silhouette with its frameless design. This stylish, high-quality, heavy glass swing door enclosure makes installation a breeze. With the TruFit Series, heavy glass can be combined with a fiberglass stall without needing to find a stud when installing the door. The TruFit Series utilizes custom jamb and channels to allow for easy, on-site adjustment to the wall and curb conditions. The single door TruFit option is available in width sizes from 23-1/2″ up to 38,” with 1/2″ of adjustment. The door and panel option can be order in width sizes from 35-3/8” up to 74-5/8,” allowing 1-1/4” of adjustment.

  • Available width sizes: varies by series design
  • Available height sizes: 72” and 75” (jamb is 7/16” taller than top of glass door)
  • Glass thickness: 3/8”
  • Heavy glass hinges and through-the-glass C-pull
  • Three stock finishes

Optional Features

TruFit Series

Optional Features

Cardinal 10™ Surface Protection provides an easy-clean, non-stick surface that repels both water and oils. The treated glass is extremely resistant to damage, etching, or stains caused by various minerals, soaps, chemicals, and other harmful materials. Cardinal 10 provides customers an extra layer of durability that saves cost on maintenance and cleaning for peace of mind.

Glass Options

TruFit Series

Glass Options

Colored Glass
  • Clear Glass
  • Low-Iron Glass
  • Acid Etch
  • Antique
  • Artic Blue
  • Azuria
  • Bamboo
  • Bronze
  • Bubbles
  • Coral
  • Forest
  • Glue Chip
  • Gray
  • Krystal Klear
  • Master Carre
  • Monumental
  • Rain
  • Solexia
Cardinal Low-Relief Cast Glass
  • Cardinal Affinity
  • Cardinal Flurry
  • Cardinal Lunar
  • Cardinal Rain
  • Cardinal Tranquility
  • Cardinal Wisp
Cast Glass
  • Cottage
  • Creek
  • Lava
  • Lodge
  • Marine
  • Meander
  • Monsterra
  • Palm
  • Retro Seedy
  • Rock Wall
  • Safari
  • Sensu
  • Storm
  • Ultimate Optique™
  • Waterfall
  • Wave
Low-Relief
  • Linen
  • Paint
  • Retro Seedy
  • Snowfall
  • Ultra Seedy

Hardware Options

TruFit Series

Hardware Finish Options

Brushed Nickel
Chrome
Roman Bronze

Hardware Options

Glass-to-Wall Hinges
  • CHG HGTW – Glass-to-Wall Hinge, Beveled Edge
  • CHG HGTWA – Glass-to-Wall Adjustable Hinge, Beveled Edge
  • CHG HGTWOP – Glass-to-Wall Hinge w/ Offset Plate, Beveled Edge
  • CHG HGTWSB – Glass-to-Wall Hinge w/ Small Backplate, Beveled Edge
  • CHG HGTWH – Heavy Glass-to-Wall Hinge, Beveled Edge
  • CHG HGTWS – Glass-to-Wall Hinge, Square Edge
  • CHG HGTWAS – Glass-to-Wall Adjustable Hinge, Square Edge
  • CHG HGTWOPS – Glass-to-Wall Hinge w/ Offset Plate, Square Edge
  • CHG HGTWSBS – Glass-to-Wall Hinge w/ Small Backplate, Square Edge
  • CHG HGTWSH – Heavy Glass-to-Wall Hinge, Square Edge
  • CHG HGTWOP H – Heavy Glass-to-Wall Hinge w/ Offset Plate, Beveled Edge
  • CHG HGTWOP SH – Heavy Glass-to-Wall Hinge w/ Offset Plate, Square Edge
Glass-to-Wall Clips
  • CHG CGTW – Glass-to-Wall Clip, Beveled Edge
  • CHG CTWGTW – Transom Glass-to-Wall Clip, Beveled Edge
  • CHG CGTWS – Glass-to-Wall Clip, Square Edge
  • CHG CTGTWS – Transom Glass-to-Wall Clip, Square Edge
  • CHG CNDC – No Drill
Sleeve-Over-Glass Clips
  • CHG CSL90 – 90° Sleeve-Over-Glass Clip
  • CHG CSL135 – 135° Sleeve-Over-Glass Clip
Pulls
  • CHG 65M – 6” Single Mount C-Pull
  • CHG 6BTB – 6” Back-to-Back C-Pull
  • CHG LP 6BTB – 6” Back-to-Back Ladder Pull
  • CHG SQ 6BTB – 6” Back-to-Back Square Pull
  • CHG CR 6BTB – 6” Back-to-Back Crescent Pull
  • CHG 6ABTB – 6” Apollo Back-to-Back Pull
  • CHG 85M – 8” Single Mount C-Pull
  • CHG 8BTB – 8” Back-to-Back C-Pull
  • CHG LP 8BTB – 8” Back-to-Back Ladder Pull
  • CHG SQ 8BTB – 8” Back-to-Back Square Pull
  • CHG CR 8BTB – 8” Back-to-Back Crescent Pull
  • HG 8ABTB – 8” Apollo Back-to-Back Pull
Knobs
  • CHG KSM – Single Mount Knob
  • CHG KCBTB – Back-to-Back Cushioned Knob
  • CHG RP – Recessed Pull
  • CHG RP-KSM – Cushioned Mount
  • CHG KASM – Apollo Single Mount Knob
  • CHG KABTB – Apollo Back-to-Back Knob
Towel Bars
  • CHG TB18 – 18” Single Mount Towel Bar
  • CHG TB20 – 20” Single Mount Towel Bar
  • CHG TB22 – 22” Single Mount Towel Bar
  • CHG TB24 – 24” Single Mount Towel Bar
  • CHG TB27 – 27” Single Mount Towel Bar
  • CHG TB30 – 30” Single Mount Towel Bar
  • CHG 18BTB – 18” Back-to-Back Towel Bar
  • CHG 24BTB – 24” Back-to-Back Towel Bar
  • CHG ATB18 – 18” Apollo Single Mount Towel Bar
  • CHG ATB24 – 24” Apollo Single Mount Towel Bar
Combo Towel Bar / Pulls
  • CHG TB6x12 – 12” Towel Bar w/ 6” C-Pull
  • CHG TB6x14 – 14” Towel Bar w/ 6” C-Pull
  • CHG TB6x16 – 16” Towel Bar w/ 6” C-Pull
  • CHG TB6x18 – 18” Towel Bar w/ 6” C-Pull
  • CHG TB6x20 – 20” Towel Bar w/ 6” C-Pull
  • CHG TB6x22 – 22” Towel Bar w/ 6” C-Pull
  • CHG TB6x24 – 24” Towel Bar w/ 6” C-Pull
  • CHG TB8x24 – 24” Towel Bar w/ 8” C-Pull
Other Hardware Options
  • CHG CRH – Robe Hook
  • U-Channel

Configuration

TruFit Series

Configuration

The TruFit Series swing door enclosures are stocked as a single door option or a door and panel option. The door glass is stocked in every 1/2″ of width, and the panels stocked in every 1″ of width.

  • Swing Door
  • Swing Door with Inline Panel
  • Swing Door with Return Panel
  • Swing Door with Inline Panel and Return Panel